Your boiler controls explained To maximise efficiency, we recommend setting your radiator dial to 75 degrees and your hot water to 60 degrees. Once you’ve got your boiler running at the optimal temperature, you’ll want to set the timer for when you need heating the most.
What does 0.0 bar mean on boiler?
On most digital gauges, you’ll see a flashing pressure reading, if there’s a low (or high) pressure warning. If your boiler pressure reads less than 1 bar, it’s possible that you might have lost water from the system, which needs to be replaced.
Why is my Glow Worm boiler not firing up?
In the case that there is a supply of gas to the boiler, just not enough, the boiler will lockout and display an error code. You should hire a Gas Safe engineer to test the gas pressure and find out why there’s an insufficient supply – a couple of potential causes include a frozen gas meter or a faulty gas valve.
What should my heat be set at?
According to ENERGY STAR, setting your thermostat to 68 degrees Fahrenheit (20 degrees Celsius) when you’re home is the ideal balance of comfort and energy efficiency.
What temperature should I set my combi boiler too?
Modern boilers will have a digital dial where you can set the output temperature. For combi boilers it is recommended to set the output temperature for the radiators at 75 degrees and the water temperature at 60 degrees.
What is a Flexicom boiler?
The Flexicom CX Combi boiler is a compact and versatile combination boiler that is able to provide high levels of central heating and hot water for properties of various sizes.
What does F4 on boiler mean?
If your Glow-Worm boiler is showing the F4 fault code on the display panel, it means there is an ignition fault. It’s the printed circuit board (PCB) on your boiler that controls electrical components. When it’s not it will lock out and display a fault code.
Why is my boiler not firing up?
A boiler might not ignite due to various possible reasons – insufficient pressure, blockage in the burner, faulty valves, frozen pipes etc. Sometimes, you can fix the problem on your own. In other cases, you don’t have any choice but to call an engineer.
Why do I have to bleed my radiators so often?
All radiators require bleeding to remove air bubbles that form periodically during the life of a system. When radiators are not working properly, or when they are not putting out as much heat as they should, some parts of the house will be colder than others.
Can I make any changes to my Glow-worm boiler?
It is, therefore, important that no alteration is made to the boiler, without permission, in writing, by Glow- worm. Any alteration not approved by Glow-worm, could invalidate the certification, boiler warranty and may also infringe the current issue of the statutory requirements. Important Information WARNINGS Gas Leak or Fault
How do I contact glow-worm customer service?
Customer Service: 01773 828100 Technical Helpline: 01773 828300 General and Sales enquiries: Tel. 01773 824639 Fax: 01773 820569 To register your Glow-worm appliance call: 0800 0732142 Supplied By spares.co Tel. 0161 620 6677 3 CONTENTS DESCRIPTION SECTION PAGE
Is this boiler deemed to meet the requirements of Directive 92/42/EEC?
This boiler meets the requirements of Statutory Instrument, No. 3083 The Boiler (Efficiency) Regulations, and therefore is deemed to meet the requirements of Directive 92/42/EEC on the efficiency requirements for new hot water boilers fired with liquid or gaseous fuels. Type test for purposes of Regulation 5 certified by: Notified body 0087.
