This Cisco® SFP-10G-LR-S compatible SFP+ transceiver provides 10GBase-LR throughput up to 10km over single-mode fiber (SMF) at a wavelength of 1310nm using a LC connector. It is guaranteed to be 100% compatible with the equivalent Cisco® transceiver….
| Color : | Silver |
|---|---|
| Weight : | 0.073 LB |
What is the difference between SFP-10G-LR S and SFP-10G-LR?
Temperature Range SFP-10G-LR-S and SFP-10G-LR transceivers have different temperature ranges. But the operating temperature range of SFP-10G-LR-S is smaller, so SFP-10G-LR-S is better for shorter transmission distance applications than SFP-10G-LR.
What is Cisco SFP-10G-LR?
The Cisco 10GBase-LR SFP+ transceiver module was designed for long range data transmission and supports data transfer over a distance 10 kilometers (6.2 miles) using singlemode fiber. While this SFP+ module is capable of transmitting data over long distances, there is no minimum distance required.
Is SFP-10G-LR single mode or multimode?
| Models / Specs | Data Rate | Fiber mode |
|---|---|---|
| SFP-10G-SR | 10G | Multimode |
| SFP-10G-LR | 10G | Single mode |
| SFP-10G-LRM | 10G | Multimode |
| SFP-10G-ER | 10G | Single mode |
Does SFP 10G SR support 1g?
Most SFP and SFP+ transceivers only run at its rated speed as they are manufactured, thus 10Gb SFP+ optics on 10Gb switch can not auto-negotiate down to 1Gb if the other end is gigabit switch. But when plugging a 1Gb SFP module in the 10G SFP+ port, the 10Gb switch will run at 1Gb.
Does Cisco make a 10Gb copper SFP?
Cisco SFP-10G-T-X Compatible 10GBASE-T SFP+ Transceiver Module (Copper, 30m, RJ-45) Cisco SFP-10G-T-X compatible SFP+ transceiver provides 10GBase-T throughput up to 30m over cat6a/cat7 copper cable via RJ-45 connector. This transceiver is compliant with IEEE 802.3an, IEEE 802.3az, SFF-8431 and SFP+ MSA.
What is LR in CIsco?
LR is Layoffs in CIsco speak but, it stands for Limited Restructuring.
What is the difference between SR and LR?
SR stands for Short Reach, and LR stands for Long Reach. SR transceivers are almost always multi-mode, and optimized for high speeds over relatively short distances. Higher end cables and transceivers can support transmissions of several kilometers.
What is the difference between LR and SR SFP?
Can you connect SFP+ to SFP?
SFP modules may can be used in SFP+ slot, but a SFP can never be connected to a SFP+ module. For their different speeds, transmission distance and wavelength. 10 SFP+ only can use for 10G SFP+ port, and can never auto-negotiate to 1G.
What is the difference between SFP 10G SR S and SFP 10G SR?
The main difference between SFP-10G-SR and SFP-10G-SR-S is the different features. According to Cisco, S-class optics is an inexpensive option designed for enterprise and data center 10G and 40G applications. Another difference is the price, SFP-10G-SR-S is offered with a more attractive price.
What is the Cisco 10GBASE-LR SFP+ module?
The Cisco 10GBase-LR SFP+ module offer customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. The Cisco 10GBase-LR Module supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652).
What is the difference between the Cisco sfp-10g-lr-X and the s fp-10g-lr10-I?
The Cisco SFP-10G-LR-X is a multirate 10GBASE-LR, 10GBASE-LW, and OTU2/OTU2e module for extended operating temperature range. It supports a link length of 10 kilometers on standard Single-Mode Fiber (SMF, G.652). The Cisco SFP-10G-LR10-I supports a link length of 10 kilometers on standard Single-Mode Fiber (SMF, G.652).
What is the Cisco sfp-10g-zr?
The Cisco SFP-10G-ZR is a multirate 10GBASE-ZR, 10GBASE-ZW, and OTU2/OTU2e module. It supports link lengths of up to about 80 kilometers on standard Single-Mode Fiber (SMF, G.652). This interface is not specified as part of the 10 Gigabit Ethernet standard and is instead built according to Cisco specifications. Cisco SFP+ Twinax copper cables
Does the Cisco sfp-10g-sr module support FCoE?
The Cisco 10GBASE-SR module supports a link length of 26 meters on standard Fiber Distributed Data Interface (FDDI)-grade Multimode Fiber (MMF). Using 2000 MHz*km MMF (OM3), up to 300-meter link lengths are possible. Using 4700 MHz*km MMF (OM4), up to 400 meter link lengths are possible. SFP-10G-SR-S does not support FCoE. Cisco SFP-10G-SR module
